Component Specification
Frequency Converter (as an example)
Version: 01
Document No. DEV.0302en
00.00.0000

Status: draft

Document Owner / Dokumenten Eigentümer:

Max Mustermann

Content

Chapters

1	Content	2

1.1	Chapters	2

1.2	Tables	3

1.3	Figures	3

1.4	Abbreviations	3

2	Scope	4

2.1	Usage	4

2.2	Content source	4

3	Introduction of component	5

3.1	Usage	5

3.2	Functionality	5

3.3	Sketch / Blockdiagram / Drawing	5

4	General requirements	6

4.1	Norms	6

4.2	Standards	6

4.3	Certifications	6

4.4	Operating temperature	6

4.5	Storage temperature	6

4.6	Operating Height (sea level)	6

4.7	Operating humidity	6

4.8	IP-class	6

4.9	Optic indicators	6

4.10	Diagnostics	6

4.11	Speed / Torque / Gear (if Motor)	6

5	Mechanical requirements	7

5.1	Dimensions	7

5.2	Weight	7

5.3	Color	7

5.4	Material	7

5.5	Mounting	7

6	Electrical requirements	8

6.1	Voltage	8

6.1.1	Nominal	8

6.1.2	Min/max	8

6.2	Current	8

6.2.1	Nominal	8

6.2.2	Min/Max	8

6.3	Power	8

6.3.1	Nominal	8

6.3.2	Min/Max	8

6.4	Inputs	8

6.4.1	Digital	8

6.4.2	Analogue	8

6.5	Outputs	8

6.5.1	Digital	8

6.5.2	Analogue	8

6.6	Interfaces	8

7	Change history	9

Tables

Tabelle 1: Change History

Figures

Abbreviations

MAB	Müller Apparatebau Kranzberg

V	Voltage

I	Current

P	electric power

Referenced documents

Document 1

Document 2

Scope

This document discribes the requirements by a component.

Usage

This document must be used to communicate about a required component.
This document can be used internally or externally with suppliers or sub-suppliers.
This document must be used by the purchasing department to do requests for quotes (RFQ’s).

Each requirement needs its own sub-chapter-number to get a reference to each requirement.

Example:

1.2.3 The components color must be red.

1.2.4 The components weight must be lower than 2kg

1.2.5 The number of screws must be lower than 20 pieces.

Content sources

The contents are coming from the department or person, who needs the component.

Introduction of component

This chapter must be used to describe what the component has to do either as a stand alone or inner a system.

Usage

Functionality

Sketch / Blockdiagram / Drawing

General requirements

This chapter describes the necessary fulfilling of norms, standards or certification and general requirements.

Norms

Standards

Certifications

Operating temperature

Storage temperature

Operating Height (sea level)

Operating humidity

IP-class

Optic indicators

Diagnostics

Speed / Torque / Gear (if Motor)

Mechanical requirements

Dimensions

Weight

Color

Material

Mounting

Electrical requirements

Voltage

Nominal

Min/max

Current

Nominal

Min/Max

Power

Nominal

Min/Max

Inputs

Digital

Analogue

Outputs

Digital

Analogue

Interfaces

Additional

Change history

Letzteast Version: 01

Datum	Version	Autor	Kommentar (detailed, clear, reference to page)
06.11.2019	01	Michael Grzan	Creation of template

Tabelle 1: Change History

Dokument Status: vorläufig (vorläufig, freigegeben, Kopie, geändert)